Check for Maximum or Fixed Constraints or Overrides
Use these instructions to check for Maximum or Fixed Constraints or Overrides.
Open the Stocking Policy page in the application
2. Look at the SKU Overrides container for any override that might be driving the stock level.
3. Look at the SKU Constraints container for any constraint that might be driving the stock level.
Are the limits Pre-Optimization?
If yes, then those may cause other SKU in the same Service Group to over-stock to compensate for the disallowed service. Depending on the severity of the limit compared to the contribution to service groups, this configuration may result in service groups missing targets.
Are the limits Post-Optimization?
If yes, then these may cause Service Group targets to be under-achieved, but they are not driving other SKU to stock higher.